Front Upper Control Arm And Ball Joint Suspension Kit For 1998-2011 Ford Ranger

12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer13.Lower the vehicle all the way14.Measure the chassis and adjust if necessary15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm16.To conclude, test-drive the vehicleFrequently Asked Questions(1).What\'s the function of control arm?The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward(2).What is the significance of the control arm for the car?(3).How to tell the quality of control arm?Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance.(4).Do I need to replace the control arm if the bushings are worn? What is the safety risk?(5).What is the average cost of replacing control arms?The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hoursBall Joint Replacement Guideline:If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension Manufacturer Part Number: EC80945801 Interchange Part Number: K80052,K80054,K8771T Placement on Vehicle: Front, Upper, Right, Left, Lower Superseded Part Number: pressing ball joint car,upper and lower ball joints replacement Custom Bundle: No Type: Control Arm & Ball Joint Assembly Items Included: Mounting Hardware Features: Greasable OE/OEM Part Number: control arm car,suspension arm,upper lower control arm ball joint Material: Alloy Steel Manufacturer Warranty: 10 Years Mounting Style: Bolt-On Performance Part: No Universal Fitment: No Cotter Pin Hole: Yes Control Arm Construction: Forged Adjustable: Yes Finish: Coated